uher 1004-S User Manual

~UHER
~ münchen
4000 REPORT MONITOR
Bedienungsanleitu ng
Operating Instructions
Instructions d'emploi
Radiotrevisan UHER 1004-S

uher 1004-S Specifications

General

Frequency Range	20 Hz - 20 kHz
Signal-to-Noise Ratio	> 60 dB
Power Supply	220 V AC, 50 Hz
Input Impedance	1 MOhm
Output Impedance	600 Ω

Summary

Setting Up the UHER 4000 REPORT MONITOR

Operation on Dry Cells

Details on using 1.5-volt dry cells, including testing battery strength.

Operation on UHER Special Storage Battery

Instructions for using UHER Z 212 or Z 214 rechargeable storage batteries.

Operation on UHER Power Supply Unit

How to operate the recorder using the Z 124 A1 mains power supply unit.

Operation on Car Batteries

Controls and Their Functions

Power, Speed, and Tape Transport Controls

Explains power switch, speed selector, and tape transport keys (forward, stop, pause, start, rewind).

Recording and Monitoring Controls

Preparing for Recording or Playback

Loading the Tape Correctly

Step-by-step guide on how to load magnetic tape reels onto the recorder.

Selecting Tape Speed and Powering On

Instructions for choosing tape speed and turning the recorder on with the power indicator.

Playback Operation

Playback Methods (Speaker, Hi-Fi, Headphones)

Record Operation

Connecting Sources and Setting Record Level

Guide to connecting input sources and adjusting the optimal record level using the meter.

Choosing Level Control Type (Manual/ALC)

Specific Recording Scenarios (Microphone, Radio, Record Player)