or dynamic pick-up system and with built-in equalizing pre-
amplifier may be used for direct recording.
1.
Connect record-player \0 RADIO PHONO socket (3) - by
means
of
an
adapter lead if the record-player
has
phono
connectors.
2.
Select tape speed, then press the
PAUSE
(22),
START
(23)
and RECORD (20) keys.
3.
Switch
on
record-player. Set tonearm
on
record and adjust
recard level (see sec. 7
B).
4.
After making record level test, return tonearm to starting
grooves
of
the record and commence tape transport by
flipping the
PAUSE
key (22) back up.
Then follow the same general procedure that is described
in
sec. 7.1.
B) Recording
trom
record-player connected
to
a hi-fi sound
system
or
to
a radio
1.
Connect equipment to
UHER
4000
REPORT
MONITOR
as
described
in
sec.
5.
2.
Switch sound system or radio to phono playback.
Then follow the general procedure stated
in
items 2
to
4
of
sec. 7.3
A.
7.4 Recording
trom
a second
tape
recorder (dubbing)
Many cases arise
in
which recordings need
to
be copied from
ane tape machine onto another. The procedure should be as
folIows:
32
All
UHER
tape recorders are now equipped with a standardized
rad
i0 record/playbacksocket
that
1s
labelIed either.!.or
Radiol
Phono.
Plug one end
of
the connecting lead into the
Phono
input socket
of
the recording machine. The phono input socket
on
UHER
recorders
is
labelied either P
or
Radio/Phono.
In
accordance with their respective operating instructions, switch
the
playback machine
to
playback
mode
and the recording
machineto
re
cord
mode.
Nospecialswitchingtothe
phono
input
is
needed when recording
on
UHER
4000
REPORT
MONI-
TOR,
however. The correct recard level,
on
the
other hand,
must be set just
as
in
other types
of
recording.
This procedure also applies
to
other makes
of
tape recorders
if they are equipped with standardized socketry.
7.5 Recording from
telephone
UHER
4000
REPORT
MONITOR
mayaiso
be used
to
record
telephone conversations. UHER telephone adapter A
261
will
be required, however. The operating instructions supplied with
the
adapter contain all additional details.
Tape recorder operation is the same
as
in
other types
01
re-
cording.
7.6 Recording
with
UHER
Akustomat
F 413
The Akustomat
® is
an
electronic-acoustical switch
that
-
once UHER 4000
REPORT
MONITOR has been switched into
record mode - automatically starts tape transport at the onset
01
sound and automatically stops tape movement when sound
stops. Connect the Akustomat
to
the socket marked.6... Addi-
.tional details will be found
in
the operating instructionssupplied
with the "Akustomat".
To Next Page
