What to do if the LCD display on my ULTICARE IPET PRO is blank?
If the LCD display on your ULTICARE Blood Glucose Meter is blank when you try to perform a test, check the batteries. If the problem persists, further assistance is needed.
Why is my ULTICARE IPET PRO Blood Glucose Meter not working after I changed the batteries?
If your ULTICARE Blood Glucose Meter does not function after new batteries are installed, remove the batteries and wait for 1 minute. Then, reinstall the batteries, ensuring they are correctly installed, to see if the meter works properly.
What to do if a test strip has not been inserted properly into my ULTICARE IPET PRO Blood Glucose Meter?
If a test strip has not been inserted into the ULTICARE Blood Glucose Meter properly, review the instructions and reinsert the test strip correctly.
What to do if a test strip remains in the test port for too long in my ULTICARE IPET PRO Blood Glucose Meter?
If a test strip remains in the test port for more than 2 minutes before testing with your ULTICARE Blood Glucose Meter, reinsert the test strip into the test port.
How to fix a defective test strip on ULTICARE IPET PRO Blood Glucose Meter?
If you suspect a defective test strip is causing issues with your ULTICARE Blood Glucose Meter, replace it with a new one.
General| Working Temperature Humidity | 50°F - 104°F (10°C - 40°C) |
|---|---|
| Hematocrit | 10 - 90% RH |
| Test Sample | 20 - 60% |
| Sample Volume | 0.7 µl |
| Measuring Unit | mg/dL or mmol/L |
| Measuring Range | 20 - 600 mg/dL (1.1 - 33.3 mmol/L) |
| Test Time | 5 seconds countdown |
| Average | 7/14/30 days average |
| Memory Capacity | 500 most recent results |
| Meter Storage | Store at temperature -4°F - 122°F (-20°C - 50°C), Less than 90% RH |
| Power Supply | 2 AAA batteries |
| Battery Life | Approximately 1000 tests |
Weight and Dimensions| Dimensions | 106L x 66W x 20H mm |
|---|---|
| Weight | 65 g without batteries |
Procedure for setting the meter's year, date, and time, including 12hr/24hr format selection.
Key precautions and advice to follow before performing glucose tests.
Steps for preparing the test strip and inserting it into the meter for testing.
Instructions on how to safely remove and dispose of a used lancet from the lancing device.
Guidelines on when it is appropriate to perform a control solution test for accuracy.
Step-by-step guide on accessing and viewing stored test results and averages in the meter's memory.
Instructions for safely cleaning the exterior of the iPet PRO blood glucose meter.
Guidelines for proper handling, storage, and care of the meter to prevent damage.
Details UltiMed Inc.'s lifetime guarantee for the iPet PRO meter, including repair or replacement of defective units.
To Next Page