Error Messages
DISPLAY DESCRIPTION ACTION
The control solution temperature is HIGHER
than permitted for analysis.
Move to a different environment
(50ºF - 104˚F or 10ºC - 40˚C) and
wait for 30 minutes before retesting.
The control solution temperature is
LOWER than permitted for analysis.
Temperature is TOO HIGH to perform a test.
Error Messages (continued)
DISPLAY DESCRIPTION ACTION
Temperature is TOO LOW to perform a test.
Move to a different environment
(50ºF - 104˚F or 10ºC - 40˚C) and wait
for 30 minutes before retesting.
Battery power is too depleted for any
further usage.
Replace with 2 AAA batteries immediately.
An error message indicating a problem
with the code.
Code the meter again. If the problem persists,
contact customer service.
To Next Page
Loading...