ULTICARE IPET PRO - About the iPet PRO Test Strip

6
7
iPet PRO test strips are for blood
iPet PRO meter.
Each test strip can be used
only ONCE!
The test strip consists of
1.
the test strip
2.
To confirm that sufficient
blood has been applied to
the target area
3. Contact Bar: The end of the test
strip inserted into the test port to
activate the meter
•
Do not use expired test strips as
this may cause inaccurate results
•
the vial, replace the vial cap
immediately and close it tightly
Test Strip Vial Label
Test Strip Vial
top side back side
1
2
3