Need help?Do you have a question about the Ultimaker 2+ and is the answer not in the manual?
General| Build Volume | 223 x 223 x 205 mm |
|---|---|
| Layer Resolution | 20 - 200 microns |
| Print Technology | Fused Filament Fabrication (FFF) |
| Filament Diameter | 2.85 mm |
| Print Speed | 30 - 300 mm/s |
| Connectivity | USB, SD Card |
| Weight | 11.3 kg |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, CPE |
| Display | LCD |
| Software | Cura |
| Power Supply | 100 - 240 VAC, 50 - 60 Hz |
| Operating Temperature | 15 - 32 °C |
| Dimensions | 342 x 588 mm |
To Next Page
