Need help?Do you have a question about the Ultimaker S5 Pro Bundle and is the answer not in the manual?
General| Build Volume | 330 x 240 x 300 mm |
|---|---|
| Layer Resolution | 20 - 600 microns |
| Print Technology | Fused Filament Fabrication (FFF) |
| Number of Print Heads | 2 |
| Software | Ultimaker Cura |
| Print Speed | Up to 24 mm³/s |
| Supported Materials | PLA, ABS, Nylon, CPE, TPU 95A, PP, PVA |
| Nozzle Diameter | 0.4 mm |
| Connectivity | Wi-Fi, Ethernet, USB |
| Chamber | Heated |
| Display | 4.7" color touchscreen |
| Dimensions | 495 x 585 x 780 mm |
| Power Requirements | 100-240V, 50-60Hz |
Important warnings and safety notices provided in the manual.
General guidelines for safe operation and handling of the printer.
Details on electromagnetic compatibility and electrostatic discharge hazards.
Detailed procedure for physically assembling the Ultimaker S5, Material Station, and Air Manager.
Guides through the initial printer setup, including language and print core installation.
Guide to preparing 3D models for printing using Ultimaker Cura software.
Common error codes and their corresponding troubleshooting steps or links.
To Next Page
