Need help?Do you have a question about the Ultimaker 2+ Connect and is the answer not in the manual?
General| Build Volume | 223 x 220 x 205 mm |
|---|---|
| Layer Resolution | 20 - 600 microns |
| Filament Diameter | 2.85 mm |
| Connectivity | Wi-Fi, Ethernet, USB |
| Print Technology | Fused Filament Fabrication (FFF) |
| Print Speed | Up to 24 mm³/s |
| Nozzle Diameter | 0.4 mm |
| Max Heated Bed Temperature | 100°C |
| Supported Materials | PLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A, PP, PVA |
| Print Head | Single extrusion |
| Display | 2.4" color touchscreen |
| Power Input | 100-240 V AC, 50-60 Hz |
| Max Print Temperature | 260 ºC |
Outlines safe operating practices, handling of hot parts, and user responsibilities for the printer.
Details electrical, mechanical, burn, and emission hazards associated with the printer's operation.
Instructions for physically installing the spool holder, build plate, and connecting the power cable and Air Manager.
Guides the user through initial printer setup, including bed leveling and loading material for the first time.
Outlines the workflow in Ultimaker Cura, covering model preparation, slicing, and previewing print settings.
Explains the features and benefits of the Air Manager, including UFP filtering and physical barriers for safety.
Explains how the printer displays errors and where to find more information about specific error codes.
Covers common causes and troubleshooting steps for issues where the printer is not extruding material correctly.
Provides solutions for prints not sticking to the build plate or warping, including build plate leveling and Cura settings.
To Next Page
