Ultimaker 2+ Connect - Whats in the Box

Ultimaker 2+ Connect user manual 14
3.2 What's in the box?
Ultimaker 2+ Connect
The Ultimaker 2+ Connect is supplied with several hardware accessories. Check if all these items are
included before continuing:
Air Manager
The Air Manager is shipped in several parts, which can be installed in a few easy steps.
Check if all these items are included before continuing:
1. Filter housing
2. Filter
3. Cover
4. Front enclosure
5. Air Manager cable
6. Quick start guide
Accessories
1. Glass plate
2. Spool holder
3. Power adapter and cable
4. Ethernet cable
5. USB stick
6. Calibration card
7. 0.4 mm nozzle
Consumables
8. PLA Silver Metallic 750 g
9. Glue stick
10. Oil
11. Grease
Tools
12. Hex screwdriver 2 mm
13. Hex key 2.5 mm
14. Nozzle wrench
15. Print head calibration aid
Documents
16. Quick start guide
17. Safety and warranty information