Need help?Do you have a question about the Ultimaker Original and is the answer not in the manual?
General| Build Volume | 210 x 210 x 205 mm |
|---|---|
| Layer Resolution | 20 - 200 microns |
| Print Technology | Fused Filament Fabrication (FFF) |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 2.85 mm |
| Connectivity | SD card |
| Printer Dimensions | 357 x 342 x 388 mm |
| Weight | 11.3 kg |
| Print Speed | 30 - 300 mm/s |
| Power Supply | 221 W |
| Supported Materials | PLA, ABS |
Provides an introduction to the Ultimaker Original and its specifications.
Details technical specifications including printing, dimensions, temperature, and electrical requirements.
Guides users through downloading and installing the necessary Cura software for the printer.
Walks users through the initial setup and configuration wizard for the Ultimaker Original.
Provides step-by-step instructions for loading filament and attaching the spoolholder.
Explains the main screen and key features of the Cura software interface.
Details the mouse actions required to navigate and interact with the 3D model in Cura.
Guides users on downloading 3D files from YouMagine.com and loading them into Cura.
Explains how to prepare a 3D model in Cura, including settings and saving to SD card.
Details the process of transferring a print file from an SD card to the printer for printing.
Provides an initial look at the Ultimaker controller display and its key components.
Explains how to navigate the controller menu and use its basic functions.
Details how to start and manage prints directly from the Ultimaker controller.
Provides general tips and advice for keeping the Ultimaker Original in optimal condition.
Instructions for maintaining and replacing the blue tape on the build plate.
Guide on cleaning and maintaining the glass build plate of the heated bed.
Steps to clean the material feeder, ensuring proper filament grip and feed.
Instructions on lubricating the Z-axis threaded rod and X-Y axes rods for smooth operation.
Defines key terms and components used throughout the Ultimaker Original user manual.
To Next Page
