14
B3.
1. First rotate the the small black lever vertically
then pull it all the way up.
2. Now take the black feeder part and pull it
outwards, this gives you a better view how to
3.-
wards between the two wooden plates and up
through the coupling.
4.
through to the end of the bowdentube untill you
can’t move it any further.
5. Now rotate the black feeder part back into
place. Apply some pressure so the lever can be
pushed back down.
6. Now you can easily rotate the black lever
back so that the material feeder places the right
To Next Page
Loading...
