Need help?Do you have a question about the Ultimaker Original and is the answer not in the manual?
General| Build Volume | 210 x 210 x 205 mm |
|---|---|
| Layer Resolution | 20 - 200 microns |
| Print Technology | Fused Filament Fabrication (FFF) |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 2.85 mm |
| Connectivity | SD card |
| Printer Dimensions | 357 x 342 x 388 mm |
| Weight | 11.3 kg |
| Print Speed | 30 - 300 mm/s |
| Power Supply | 221 W |
| Supported Materials | PLA, ABS |
To Next Page
