A2.
Printing
fabrication (FFF)
Build volume 21 x 21 x 20,5 cm
Layer resolution Ultra high
High
Medium
Low
Position precision X 12,5 micron
Y 12,5 micron
Z 1.875 micron
Filament diameter 2.85 mm (generally
Print speed 30 mm/1 - 300 mm/s
Travel speed 30 mm/1 - 350 mm/s
Software
File types STL / OBJ / DAE / AMF
Supports Windows (XP 32 bit/7+)
Ubuntu Linux (12.04+)
Mac OS X (10.6 64bit +)
Connectivity Stand-alone printing
from SD-card
Physical dimensions
Frame Dimension X 35.7 cm
Y 34.2 cm
Z 38.8 cm
Operating dimension with UltiController,
spoolholder and the max height
Y 34.2 cm
Z 56.5 cm
Temperature
Ambient Operating
Temperature 15°- 32° C
Storage Temperature 0° - 32° C
temperature 180° - 260°
Operating Bed
temperature 50° - 110°
Electrical
AC INPUT 100 – 240 V,
2.0 AMPS,
50 – 60 HZ
120 watt max.
Power 19V DC @ 6.32 AMPS
Electrical with heated bed
AC INPUT 100 – 240 V,
4.0 AMPS,
50 – 60 HZ
221 watt max.
Power 24V DC @ 9.2 AMPS
WARNING: The Ultimaker Original generates high temperatures and has hot moving parts that can cause
Original from the push wheel on the UltiController or with the power-switch on the back. Allow the
Ultimaker Original to cool down for at least 5 minutes before reaching inside.
CAUTION:
and the cord is disconnected from the wall socket.
CAUTION: Only use the power supply provided with your Ultimaker Original.
20 micron
60 micron
100 micron
200 micron
6
A2.The Ultimaker experience
To Next Page
Loading...
