Ultimaker S5 Pro Bundle - Health and Safety

Ultimaker S5 Pro Bundle user manual 7
1.4 Health and safety
3D printing thermoplastics may result in the release of Ultra Fine Particles (UFPs) and Volatile Organic
Compounds (VOCs) depending on the thermoplastic used and settings of the 3D printer.
The Ultimaker products are designed for use with Ultimaker materials and are open for use with materials from
third-party suppliers.
Ultimaker materials
Ultimaker materials can be printed safely without any ltering using the recommended temperatures and settings
in a well-ventilated area (minimum refresh rate of 1.8 for a room size of 30.6 m
2
). When multiple Ultimaker 3D
printers are operated in a contained environment, emissions of UFPs and/or VOCs may vary. Please consider other
safety measures, such as a lter, cabinet and/or dedicated ventilation system depending on your specic situation.
Third-party materials
Third-party material manufacturers can supply print proles that contribute to reliable results with Ultimaker
hardware (“The Ultimaker Material Alliance Program”).
The use of print proles and materials from Ultimaker’s Material Alliances and/or other suppliers may require
additional safety measures, such as a lter, for the safe usage of such materials. Please take the relevant
information provided by the supplier of such lament/material into account at all times for safe operation. Please
check the safety data sheet of each specic material for more information.
Ultimaker cannot be held responsible for any adverse eects from the use and/or performance of these materials.