86
• Brake uid is toxic and belongs to
special waste.
• Damages varnishes and plastics.
• Avoid spillages. If spilled, rinse off
spilled liquid with water multiple
times.
• Store the old liquid in special
packaging and do not mix with old
oil.
• The color of the brake uid does
not indicate quality.
• Brake uid should be stored in
a dry, cool, and well-ventilated
place.
3. Slowly push the rear brake caliper
piston inside by making sure that
the brake uid does not overow
from the reservoir. If the brake
uid in the reservoir raises more
than the maximum limit, remove
the excessive brake uid.
4. Remove the ß clip using a nose plier
and gently punch out the disc pad
lock pin using a 3 mm drift pin and a
hammer.
5. Shows a new brake pad and a worn-
out brake pad. The brake pad should
be replaced when the wear indicator
is not visible.
To Next Page
Loading...