‐9‐
3.4 Electric wiring
(1) This pump has performed beforehand electric wiring by the side of a pump.
(2) Plug the power wire cord in the power outlet of 100V, single phase.
(3) The over-load protector (thermal protector, manual reset type) is provided for this pump.
Switch off power before electric wiring. Never connect electric wire cord when
power line is hot. This may cause electric shock.
Perform electric wiring correctly in accordance with the “Electric Equipment
Technical Standard” and “Internal Wiring Regulation.” Incorrect wiring will
result in fire.
Electric wiring should be carried out in accordance with Electric Regulation and
Standard. Miss wiring may cause fire.
To Next Page
Loading...
