Rotary Switch
Rotary
Switch
Position
Function
V
kHz
0
C
A
DWELL
RPM x 10
DC voltage measurement.
AC voltage measurement.
Resistance measurement.
Diode test.
Continuity test, Unit:
DC Current Measurement.
Temperature Measurement, Unit:
0
C
Frequency Measurement, Unit: Kilohertz
Automotive ignition dwell testing, Unit: degree
Automotive engine tach testing (Displayed
Reading x 10), Unit: rpm
Functional Buttons
Button
Operation Performed
POWER
HOLD
Turn the power on and off.
Press HOLD once to enter hold mode.
Press HOLD again to exit hold mode and
the present value is shown.
In Hold mode, is displayed
11
Model UT106: OPERATING MANUAL
Below table indicated for information about the rotary
switch positions.
Below table indicated for information about the functional
button operations.
l
l
l
V
To Next Page
Loading...
