58
Model UT106: OPERATING MANUAL
Battery
Open up Screw
C. Replacing the Battery (see figure 25)
Warning
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator “ ” appears.
To replace the Meter’s battery:
Turn the Meter power off and remove all connections
from the terminals.
Take the Meter out from the holster.
Remove the screw from the battery compartment and
open the battery compartment.
Take out the battery and replace with a new 9V battery
(NEDA1604, 6F22 or 006P).
Rejoin the battery compartment and the case bottom,
and reinstall the screw and the holster.
1.
2.
3.
4.
5.
(figure 25)
** END **
This operating manual is subject to change without notice.
To Next Page
Loading...
Need help?
General
