This Meter complies with standards IEC61010: in pollution
degree 2, overvoltage category (CAT. II 1000V, CAT. III
600V) and double insulation.
CAT.II: Local level, appliance, PORTABLE EQUIPMENT
etc., with smaller transient overvoltages than CAT. III
CAT.III: Distribution level, fixed installation, with smaller
transient overvoltages than CAT. IV
Use the Meter only as specified in this operating manual,
otherwise the protection provided by the Meter may be
impaired.
International electrical symbols used on the Meter and
in this Operating Manual are explained on page 9.
Unpacking Inspection
In the event you find any missing or damage, please
contact your dealer immediately.
Open the package case and take out the Meter. Check
the following items carefully to see any missing or
damaged part:
4
Item
Description
Qty
Model UT107: OPERATING MANUAL
English Operating Manual
Test Lead
Point Contact Temperature Probe
Holster
9V Battery (NEDA 1604, 6F22 or 006P)
1 piece
1 pair
1 piece
1 piece
1 piece
1
2
3
4
5
Safety Information
To Next Page
Loading...
Need help?
General
