UNI-T UT2000 series

UNI-T
®
Uni-Trend Group Limited
At the right bottom corner of the screen, you will see:
Display of the [Device Manager] is as follows:
Note: If no [Found New Hardware] wizard pops up on your computer screen when the
computer is properly connected to the oscilloscope and the latter is powered on
normally, right click [My Computer] and select [Attribute]. In the [System Attribute]
dialogue box select the [Hardware] box. Click the [Device Manager] button.
In the pop up [Device Manager] dialogue box, you can see a yellow UT2000/3000
icon that indicates incomplete installation.
19
Uni-Trend Group Limited
. All right reserved 2007
_
__________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software