UNI-T UT201 User Manual

MAINTENANCE(2)
Warning
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator “ ” appears.
Make sure the transformer jaw and the tets leads are
disconected from the circuit being tested before
opening the case bottom.
To replace the battery:.
1. Turn the Meter off and remove all the connections
from the input terminals
2. Turn the Meter’s case top down.
3. Remove the screw from the battery compartment,
and separate the battery compartment from the case
bottom.
4. Remove the old battery from the battery compartment.
5. Replace the battery with 2pcs of new 1.5V (AAA)
battery.
6. Rejoin the case bottom and the battery compartment,
and reinstall the screw.
** END **
This operating manual is subject to change without notice.
Model UT201/202: OPERATING MANUAL
31

UNI-T UT201 Specifications

General

Data hold	Yes
AC current range	2 - 400 A
AC voltage range	2 - 600 V
DC voltage range	0.2 - 600 V
Basic accuracy (DC voltage)	±(0.8%+1)
Basic accuracy (resistance)	±(1%+2)
Dimensions (WxDxH)	75.6 x 30 x 210 mm
Battery voltage	3 V

Weight and Dimensions

Weight	220 g