Model UT60H: OPERATING MANUAL
25
Measurement Operation(11)
Ω
Note
l The LCD displays OL indicating the tested capacitor
is shorted or it exceeds the maximum range.
l Analogue bar graph will be disabled when measuring
capacitance.
l It is normal to take a while when measuring high
capacitor 400 F. The analogue bar graph at this time
will show the time left before finishing the measurement.
l When capacitance measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove the test leads
away from the input terminals of the Meter.
To Next Page
Need help?
General
