- 11 -
Water Softener Regeneration : how ?
A - Water intake
B - Water outlet
C - Intake tap
D - Outlet tap
E - Discharge pipe
F - Regenerating pipe
G - Lid wheel
Use 1 kg of salt when the
softener is 400 mm high.
Use 2 kg of salt when the
softener is 600 mm high.
INSTRUCTIONS FOR
USE :
Install an empty vessel with
a 2-litre capacity under Pipe E.
Turn Handles C and D from
the left to the right.
Unscrew G to remove the
lid.
Insert salt.
Restore the lid to its initial
position.
Turn Handle C from the right
to the left
Let the salted water run
through Pipe F until it gets
soft.
Turn Handle D from the right
to the left
To Next Page
Loading...
