SEAT BELT
WARNING
Be sure to fasten the seat belt before starting
the truck; otherwise, if the truck turns over, the
operator might be thrown out and, in the worst
case, the operator can be crushed by the truck.
Pull out the connector at the right side and insert it into
the receptacle at the left side until it clicks into place.
To unfasten the seat belt, press the red button by the
receptacle, and the belt will automatically wind up into
the seat.
RECEPTACLE
SEAT
BELT
CONNECTOR
2-15
DOCUMENT POCKET
The operator’s seat has a document pocket at
its back. Use it for storing this Operation & Mainten
-ance Manual and otHers.
To Next Page
Loading...
