To Next PageTo Next Page
Need help?Do you have a question about the Unicum AN1244 and is the answer not in the manual?
Details on how to mount the control box, including location and drilling requirements.
Information on installing control devices like key switches, ensuring proper placement and function.
General guidelines and precautions for electrical wiring and cable management.
Instructions for connecting the 230VAC single-phase power supply cable.
Details on wiring the three-position key switch to the control board.
Instructions for wiring the sensor, including cable color correspondence.
Guidance on verifying correct sensor wiring and interpreting LED indicators.
Information on connecting and using the auxiliary relay for external device management.
Details on connecting devices to the security loop for motor stop in abnormal conditions.
Instructions for connecting the motor cable, including wire colors and section.
Procedure for verifying motor rotation sensor coherence with key switch settings.
Overview of powering on the control box and its operating temperature range.
Explanation of how to configure the control box using micro-switches SW1.
Detailed list of INFO/ALARM display codes and their meanings.
Procedure for programming limit switches to set the pool cover's working cycle.
Explanation of the automatic mode for normal cover operation with automatic stop.
How to activate pulse mode for closing control devices, noting French regulations.
Instructions for using manual mode, allowing movement beyond limit positions.
How the security loop indicates an abnormal condition or alarm.
Indication of sensor malfunctions and related error codes.
Error code for sensor power supply issues.
Indication of a blown fuse and the need to replace it.
Informational alarm for significant Archimede force.
Informational alarm for excessive Archimede force.
Procedure for resolving a software defect by power cycling the board.
Indication of a major hardware problem on the board, inhibiting motor activation.
Error code for power feed issues and recommended troubleshooting steps.
Guidance on control box maintenance and device checks for private pools.
Instructions and warnings for operating the motor directly on the control box during maintenance.
General| Brand | Unicum |
|---|---|
| Model | AN1244 |
| Category | Controller |
| Language | English |
