6
Controls and Functions
1. LCD Display Displays channel frequency and functions.
2. Numeric Keys Use to program a frequency into each channel for scanning. Also,
use for time entries and direct channel access with
MANUAL
key.
3.
E
Key Use to complete the entry whether it be programming of a
frequency to the selected channel or setting the time.
4.
TIME
Key Use the TIME key to view and set time
5
. LOCKOUT
Key Use to prevent scanning of the displayed channel. The LCD
display indicates L/O when channel is locked out. Lockout is
retained in memory. Press
LOCKOUT
again to unlock the channel.
Lockout is active only when the scanner stops on an active channel
or a channel selected in Manual Mode.
6. t Key The down arrow key allows you to scoll down through the options.
7.
SCAN
Key Use to start scanning mode.
8.
ALARM
Key Press ALARM to set the time for the alarm to sound.
9.
AM/PM
Key Press AM/PM to indentify AM or PM while setting the time or
alarm.
OPERATION
To Next Page
Loading...
Need help?
General
