Uniden BC355N - Page 34

34
If You Want to Do
This -
Here’s How -
Stop scanning Press HOLD. The scanner stays on the
displayed channel until scanning is
resumed. The bank’s screen label remains
steady and does not ash.
Resume scanning Press one of the following keys to continue
scanning:
• HOLD – Press this key to release the Scan
Hold and continue scanning. The bank’s
screen label resumes ashing.
• UP or DOWN - Press these keys to step to
the next/previous frequency. Scan Hold
remains active but single channels can be
monitored.
• Any bank key - If you press a dierent
bank key, you will start scanning in that
new bank and the bank label will resume
ashing.
• L/O key - Press this key to lock out this
frequency and step to the next frequency