54
police fire/emg
6 40.0600
hold scan
Press PROG. The scanner
programs the frequency
into the indicated channel
and then goes into SCAN
HOLD mode.
Press HOLD to release the
Hold and continue scanning
the rest of the programmed
channels, starting with the
one you just programmed.
Deleting a Programmed Frequency (programming “000.0000”)
The easiest method of deleting a frequency you have
programmed is to overwrite it with a null frequency (000.0000).
CH 40.0600
hold
From a normal scan setting
(a channel bank is ashing),
press PROG. HOLD displays
and CH displays and ashes.
Press and hold L/O for 2.5
seconds.
To Next Page
Loading...
