33
Scanning Service Bank Tips
If You Want to Do
This -
Here’s How -
Begin scanning Press any service bank key; the bank label
ashes and the SCAN message moves
across the display screen. Scanning
automatically stops on an active channel
and displays that frequency (except for
locked-out channels, which will be covered
later in this guide). It will stay on that
channel until the transmission ends.
Note: You must program channels
into the PRIVATE bank before you
can scan it.
Set up multiple
service banks to
scan
Press a desired service bank’s key until it
displays. Continue pressing other banks’
keys until all desired banks are displayed
(activated).
To Next Page
Loading...
