Uniden BC355N - Page 36

36
If You Want to Do This - Here’s How -
Continue after the
BC355N has stopped on
an active channel
If the BC355N stops on an active
channel that you do not want to
monitor but you do not want to lock
out, press the SEARCH key or the UP/
DOWN keys.
Stop searching Press HOLD. The scanner stays on
the displayed channel until searching
is resumed. Press HOLD again to
resume searching.
Select a dierent band
to search
Press the BAND key multiple times to
search through the available bands.
Select USA or Canada
band plan
When you turn on the scanner, press
and hold UP (for USA) or DOWN (for
CANADA).