13
make a call: Dial the
number, then
Press
TALK/FLASH
. Press
SPEAKER
.
answer a call Press
TALK/FLASH
. Press
SPEAKER
.
hang up Press
END
or put the handset in the cradle.
switch between the
speaker & earpiece
Press
SPEAKER
.
mute the microphone
during a call
Press
MESSAGES/MUTE
. Press again to turn
the microphone back on.
put a call on hold
Press
CLEAR/INTERCOM
. After 5 minutes on
hold, the call will be disconnected.
return to a call on hold Press
TALK/FLASH
. Press
SPEAKER
.
mute the ringer for this
call only
While the phone is ringing, press
MESSAGES/
MUTE
. Applies to individual handset ringer
only.
Changing the Volume
You can set speaker volume levels separately for each handset. You
can also set the earpiece volume on each handset. Anytime you are
listening to a speaker or earpiece, press
UP
to increase the volume and
DOWN
to decrease it.
You can also set the ringer volume separately: when the phone is in
standby, press
UP
to increase the ringer volume and
DOWN
to decrease.
If you turn the ringer volume all the way down, the ringer turns off.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider
that shows the phone number (and sometimes the caller’s name) of
incoming calls. Contact your telephone provider for more information.
To Next Page
Loading...
Need help?
General
