29
•Use only the supplied AC adapters. Be sure to use the proper adapter for the
base & any chargers.
•Do not place the power cord where it creates a trip hazard or where it could
become chafed and create a
reorelectricalhazard.
•Do not place the unit in direct
sunlight or subject it to high
temperatures.
•Fullycharged,thebaery
should provide about 7 hours
oftalkmeandabout6days
ofstandbyme.Forbest
results, return the handset to
thecradleaereachcallto
keep it fully charged.
•Whenthebaerygetstoo
low,thehandsetshowsalowbaeryalert.Ifyouhearastrangebeepduringa
call,checkthedisplay:ifyouseethelowbaeryalert,nishyourconversaon
as quickly as possible and return the handset to the cradle. If the handset is in
standby, none of the keys will operate.
•Withnormaluse,thebaeryshouldlastaboutoneyear.Replacethebaery
whenthetalkmebecomesshortevenwhenthebaeryischarged.Tobuya
replacementbaery,visitourwebsitelistedonthefrontcover.
•ThisequipmentcontainsarechargeableNickel-MetalHydride(Ni-MH)baery.
•Donotshort-circuitthebaery.
•TherechargeableNi-MHbaeriescontainedinthisequipmentmayexplodeif
disposedofinare.
•Donotchargethebaeryusedinthisequipmentinanychargerotherthanthe
onedesignedtochargethisbaeryasspeciedintheowner'smanual.Using
anotherchargermaydamagethebaeryorcauseittoexplode.
AC
adapter
Base/Charger
Part number
AAD-041S(M) /
AAD-600S(M)
Input voltage 240V AC, 50 Hz
Output voltage
9V DC @350mA /
9V DC @210mA
Baery
pack
Part number BT-694m
Capacity 300mAh, 2.4V DC