Seven-Digit Dialing
You can program your local area code into your
handset. If you get a call from within your area
code, you'll only see the 7-digit phone number. If
you get a call from outside your area code, you'll
see all 10 digits.
1 To enter an area code, press to access
the main menu.
2 Press or until
Base Settings
is
displayed and press .
3 Press or to display
Additional
and
press .
4 Press or to select
Area Code
and
press .
5 Enter the number of your area code using the
number keypad and press .
6 Press to exit and return to standby.
Call barring
When switched on, Call Barring prevents calls
from being made to a specific number, area code
or international code.
1 Press to access the main menu.
2 Press or to select
Base Settings
.
Press .
3 Press or to select
Call Barring
.
Press .
4 Enter the number using the number keypad
or . Press .
5 Press or to select
On
or
Off
.
Press to confirm.
6 Press to exit and return to standby.
[25]
UC01501BB_0 8/9/06 2:49 PM Page 25
To Next Page
Loading...
Need help?
General
