Uniden DECT1060 - Resetting Your Phone to Defaults; Resetting the Base Unit to Factory Defaults; Resetting the Handset to Factory Defaults

Resetting your phone
If you reset your phone, both the base and
handset will return to their default settings.
The time, date, handset name, and phonebook
will not return to default.
If you have more than one handset registered to
your base and you complete the following
procedure, only the handset you reset and the
base will go back to the default settings.
For the base:
1 Press to access the main menu.
2 Press or until
Base Settings is
displayed and press .
3 Press or to display Reset Base
and press .
4 Press or to select Yes and to
confirm.
5 Press to exit and return to standby.
For the handset:
1 Press to access the main menu.
2 Press or to select
Add.Settings .
Press .
3 Press or to select Reset Handset .
Press .
4 Press or to select Yes .
Press to confirm.
The handset will beep.
[30]
UC01501BB_0 8/9/06 2:49 PM Page 30