Uniden DECT1060 User Manual

Base PIN code
You need to enter the base PIN code when you
are registering handsets. For security reasons you
may wish to change the PIN code. You can
choose a PIN code up to 4 digits long.
If you reset the base from the handset, base PIN
code will be 0000.
Always keep a record of your base PIN code.
Note your PIN code and keep it in a safe place.
If you change the PIN code you will need to use
the new code for any handset registered to your
base.
1 Press to access the main menu.
2 Press or until Base Settings is
displayed and press .
3 Press or to display Base Pin and
press .
4 Enter a new PIN code (up to 4 digits) and
press .
5 Press to exit and return to standby.
Selecting a base
You can register a handset to up to 4 bases, e.g.
one at work and one at home or one upstairs and
one in the garage, and switch between them.
Once your handset is registered with other bases,
you can either specify the base you want to use
or, select Automatic for your handset to choose
the base with the strongest signal.
1 Press to access the main menu.
2 Press or to select Add.Settings .
Press .
3 Press or to select Select Base .
Press .
4 Press or to select Automatic or
the base number. Press .
[29]
UC01501BB_0 8/9/06 2:49 PM Page 29

Uniden DECT1060 Specifications

General

Brand	Uniden
Model	DECT1060
Category	Cordless Telephone
Language	English