To Next PageTo Next PageHow to fix a Uniden Radio HomePatrol-1 that won't turn on?
If your Uniden Radio HomePatrol-1 won’t turn on, hold the power button down for at least 3 seconds. Ensure the unit is receiving power and the batteries are correctly inserted. If using a power adapter, check that the adapter is also receiving power.
What to do if my Uniden Radio HomePatrol-1 stops on a channel but I can’t hear anything?
If your Uniden Radio HomePatrol-1 stops on a channel, but you can’t hear anything, first verify that MUTE is not enabled. Then, check the volume level.
What to do if my Uniden Radio HomePatrol-1 won’t turn off?
If your Uniden Radio HomePatrol-1 won’t turn off, make sure you are holding the power button down long enough. Press and hold for at least 3 – 5 seconds.
What to do if my Uniden Radio HomePatrol-1 won’t stop on any channels?
If your Uniden Radio HomePatrol-1 won’t stop on any channels, check for Avoided channels. You may also need to adjust the antenna, range, squelch, or attenuation. Try moving the unit to a different location as well.
Why is weather monitoring not working on my Uniden Radio?
If weather monitoring isn't working on your Uniden Radio, it might be due to the absence of a NOAA broadcast in your area. Try adjusting the antenna and the squelch settings. To verify functionality, move to an area known to have a NOAA broadcast.
Why recording and replay do not work on my Uniden Radio HomePatrol-1?
Recording and Replay functions on the Uniden Radio HomePatrol-1 are disabled when operating from external power only, without batteries installed, or if the battery power is too low. This is because the device writes data to the SD memory card during these operations.
General| Radio type | Portable |
|---|---|
| Tuner type | - |
| Supported radio bands | AM |
| Backlight | Yes |
| Display type | LCD |
| Display diagonal | 3.5 \ |
| Display resolution | 320 x 240 pixels |
| Display number of colors | 65536 colors |
| Antenna type | SMA |
| Product color | Black, Silver |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| RMS rated power | 2 W |
| Input voltage | 100-240 V |
| Connectivity technology | Wired |
| Apple docking compatibility | Not supported |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Compatible battery sizes | AA |
| Number of batteries supported | 4 |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -30 - 60 °C |
| Operating temperature (T-T) | -10 - 60 °C |
| Maximum memory card size | 2 GB |
| Cables included | USB |
Weight and Dimensions| Depth | 38.4 mm |
|---|---|
| Width | 149 mm |
| Height | 84.5 mm |
| Weight | 300 g |
Enables editing existing systems or creating new ones via the touch-screen interface.
Tools to view and review trunked system status and activity.
Analyzes system traffic to determine LCN assignments for EDACS and LTR systems.
Visually indicates received signal level across frequencies to identify RF signal sources.
Graphically shows signal level for a single frequency over time to locate RF sources.
Monitors trunked radio systems to find unknown channels and logs activity.
Searches frequency ranges for unknown signals and logs activity.
Install the latest version of the HomePatrol Sentinel software on your PC.
Update the firmware on your HomePatrol-1 to the latest version.
Obtain a registration key through Uniden.com to unlock advanced features.
Enter the 32-digit key on the HomePatrol-1 to unlock Extreme features.
Install necessary serial drivers on your PC for Serial mode communication.
Basic steps to program or edit radio systems in a Favorites List.
Steps to program a conventional radio system.
Instructions for programming P25 Standard Trunked radio systems.
Instructions for programming Motorola Trunked radio systems.
Instructions for programming EDACS Trunked radio systems.
Instructions for programming LTR Trunked radio systems.
Accesses tools for analyzing trunked systems like P25, Motorola, EDACS, LTR.
Converts talk group IDs between Decimal, Hexadecimal, and AFS representations.
Determines correct LCN assignments for EDACS or LTR system frequencies.
Provides a visual representation of radio activity within a frequency range.
Analyzes signal strength over time on a single frequency for direction finding.
Outputs raw decoded data for analysis using external software.
Monitors trunked systems, logging activity and recording audio for new channels.
Monitors frequency ranges, logging activity and recording audio for unknown frequencies.
Reviews results of discovery mode runs, resumes or reruns saved sessions.
Continuously searches between two specified frequencies for activity.
