What to do if my Uniden CMX760 has no transmission?
If your Uniden Radio has no transmission, check the microphone connection. Ensure the radio is not set to the Weather channel or Weather Scan. Turn it off to return to CB mode.
What to do if my Uniden CMX760 has no reception?
If your Uniden Radio has no reception, check the microphone connection, volume, and squelch settings. Also, check the antenna and its connection.
Why does my Uniden CMX760 battery power check display Lo or HI?
If the Uniden Radio battery power check displays Lo or HI, ensure your power wires have a good connection. The battery needs to be fully charged, or check your alternator. Lower voltage can cause a failure.
How to fix a Uniden Radio that does not power up?
If your Uniden Radio does not power up, check the power cord connections, the fuse, and the vehicle's electrical system.
Provides instructions on how to connect the CMX760 to the vehicle's power supply and explains ground information.
Discusses antenna matching, SWR tuning, and critical safety precautions for radio operation.
Provides instructions on how to attach the radio bracket and then mount the CMX760 unit into it.
Explains how to use the CMX760 for emergency broadcasts and the FCC regulations regarding Channel 9.
Explains the states (OFF, ON, BLINKING) for key radio functions like TX, Busy, MON, BP, Roger Beep, and SCAN.
Provides instructions on how to turn the Uniden CMX760 CB radio on and off using the power button.
Explains the procedure for transmitting and receiving signals using the PTT button on the CMX760.
Guides users on how to adjust the volume and select channels on the CMX760.
Details the steps to adjust the squelch level on the CMX760 for optimal reception.
Describes how to use the Automatic Noise Limiter (ANL) and High Cut (HI CUT) noise reduction features.
Explains how to adjust radio sensitivity using LO/DX settings to reduce noise or receive distant signals.
Guides users on how to switch to weather mode and select weather channels on the CMX760.
Explains how to activate and deactivate the Weather Alert mode for severe weather notifications.
Provides common issues like no power or reception and their suggested solutions.
Provides the procedure and address for submitting the product for warranty service.
To Next Page
General
