Unify OpenScape CP700 - Answering a Video Call

Making calls 81
Answering a video call
Prerequisite: The configuration to accept video media has to be enabled. In case
it was not enabled by administrator, you can configure the video media using the
"User settings" menu.
@ Press the key for the Main menu if needed.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
€ Select the "Configuration" function.
Open using the Softkey.
Open using the Softkey.
Enable or disable using the Softkey.
Incoming video calls appear as basic incoming calls. You can accept, reject or
deflect a video call.The incoming video call behaves similarly to basic incoming
call, only video media is added.
After accepting the video call, you will be shown the following screen:
Settings
_
$
User settings
-
_
$
Configuration
-
_
$
Video call
-
_
Video on
¢_
‹ Incoming call
Andre-Marie Ampere
3336