Unify OpenScape CP700 - Consulting a Second Party

Making calls 91
You can control if you want the DTMF digits to be shown on your display.
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Confirm with the Softkey to activate DTMF digits. You will receive a correspond-
ing confirmation.
Save the setting with the Softkey.
Exit the display menu if appropriate.
Consulting a second party
You can call a second party while a call is in progress. The connection to the first
party is placed on hold.
Prerequisite: You are conducting a call.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Connected calls
-
_
Display DTMF digits
¦
_
Q
_
¿
_