Unify OpenScape SL5

Making calls 15
Making calls
Making calls
¤ . . . use to enter a number press the Talk key briefly
or
¤ Press the Talk key and hold . . . use to enter a number
The connection is established using the send line configured for the handset.
Cancel dialing: Press the End call key
Dialing from the directory
¤ . . . use to open the directory . . . use to select an entry press the Talk key
If several numbers are defined for a directory entry:
¤ . . . use to view entries select number press the Talk key . . . the number is dialed
If uppercase is activated:
¤ . . . use to select a number press the Talk key . . . the number is dialed
Dialing from the redial list
The redial list contains the 20 numbers last dialed with the handset.
¤ Press the Talk key briefly or press the display key . . . the redial list opens . . . use to
select an entry press the Talk key
If a name is displayed:
¤ View . . . the number is displayed . . . use to browse numbers if required . . . when the desired
number is reached, press the Talk key
Managing entries in the redial list
¤ Press the Talk key briefly or press the display key . . . the redial list opens . . . use to
select an entry Options . . . possible options:
When the display backlight is disabled, the display lights up again the next time any key is
pressed. Digit keys appear on the display for pre-dialing, other keys have no further function.
Copy an entry to the directory: Copy to Directory OK
Copy the number to the display:
¤ Display number OK . . . use to amend or add numbers if necessary . . . use to save
as an entry in the directory
Delete the selected entry: Delete entry OK
Delete all entries: Delete all OK
Set automatic line seizure:
¤ Automatic Redial . . . The selected number is automatically dialed at fixed intervals (at least
every 20 seconds). The handsfree key flashes; "open listening" is activated.
The participant answers: Press the Talk key . . . the function is terminated
The participant does not answer: The call is terminated after approx. 30 seconds. The function is ter-
minated after pressing any key or after ten unsuccessful attempts.