32 Adjusting the handset settings
Adjusting the microphone sensitivity
The microphone sensitivity can be adjusted in four increments in order to
ensure better acoustics in loud environments and in case of echo.
¤ Press and hold the key use to adjust the microphone
sensitivity Save
Ringtones
Ringtone volume
¤ Audio Settings OK Ringtones (Handset) OK
Volume OK ... use to select For internal calls and alarms or
External Calls . . . use to set the volume in 5 increments or select
crescendo (increasing volume) Save
Ringtone melody
Set a variety of ringtones for internal and external calls on all of the phone's available receiving lines
(Landline, IP1, Gigaset.net) or the same ringtone for All calls.
¤ Audio Settings OK Ringtones (Handset) OK Melodies OK ... use
to select the connection . . . use to select the ringtone/melody in each case Save
Activating/deactivating the ringtone
Deactivating the ringtone permanently
¤ Use the key to set the Profile Silent . . . the following icon appears in the status bar
Activating the ringtone permanently
¤ Use the key to set the Profile Loud or Profile Personal
Activating/deactivating the alerting tone (beep)
Activate an alerting tone (beep) instead of the ringtone:
¤ Press the asterisk key and hold within three seconds press Beep . . . the following icon
appears in the status bar
Deactivate the alerting tone again: Press the asterisk key and hold
Activating/deactivating the vibration alarm
Incoming calls and other messages are indicated by a vibration.
¤ ... use Audio Settings OK Silent Alert Change (=on)
Activating/deactivating advisory tones
The handset notifies acoustically about different activities and statuses. These advisory tones can be acti-
vated/deactivated independently of each other.
¤ Audio Settings OK Advisory Tones OK ... then
Tone when keys are
pressed:
¤ Key Tones: . . . use to select On or Off
To Next Page
Loading...
Need help?
General
