Unify OpenScape SL5 User Manual

More features 87
Using the handset to open the door opener during a call
s t w Select the menu item and confirm.
Using the handset to open the door opener without holding a con-
versation
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o Enter the internal phone number for the door opener. The door is opened.
a Press the End call key to end the operation.
Activating the door release
This function only works if it has been configured by the service engineer.
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o Follow the user guidance system from this point onwards. Enter the internal
phone number of the door opener, as well as the code and type of door release:
• 1=enable with ring,
• 2=enable w/o ring,
• 3=change password.
w Confirm your entries.
a Press the End call key to end the operation.
Deactivating the door opener
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
a Press the End call key to end the operation.
Activating control relays
Open door?
Menu
Service?
*
61=Open door?
Menu
Service?
*
89=Door release
ON?
Note:
Standard code "00000". To change the code, confirm option "3=change
password". Follow the user guidance system.
Menu
Service?
*
89=Door release
OFF?

Unify OpenScape SL5 Specifications

General

Connectivity	DECT
Display	TFT color display
Battery	Lithium-ion battery
Audio	HD audio quality
Type	Cordless IP Phone
Phonebook	500 entries
Headset Connection	Bluetooth
DECT Standards	GAP
Power	Power adapter