Unify OpenStage 40 - Important information; Trademarks; Safety and Disposal Information

OSVoice – OpenStage 40 Page 3 of 5
Telephone Reference Guide Training Information Provided By: InfoTel Integrated Services
MUTE
To temporarily deactivate the microphone on the handset or speakerphone.
• Press the Mute button
• The light on Mute button will illuminate to ensure feature is
activated.
• To Deactivate mute, press the lit Mute button
• The light on the Mute button will deactivate
DO NOT DISTURB (DND)
Disables ringer and notifies callers that you are “unavailable”
• While telephone is idle
• Scroll > to access the menu
• Scroll
to and select Don Not Disturb On
(DND icon will appear on display )
To Cancel DND:
• Scroll > to access the menu
• Scroll to and select Don Not Disturb Off
RINGER CUTOFF
To disable the RINGER but allow incoming calls
To DEACTIVATE ringer
• Press and hold the ASTERISK * button (with a bell on it) located on
the keypad for approx. 3 seconds
(A BELL ICON with a slash through it will appear in display indicating ringer is
deactivated)
To ACTIVATE ringer
• Press and hold the ASTERISK * button for approx. 3 seconds
CALL WAITING
To accept a 2
nd
incoming call while on telephone
2
nd
calls may also be DEFLECTED using DEFLECT
option
• During a call, if a 2
nd
party is calling, a “Beep” tone is heard AND
display shows CALL WAITING
• To answer the 2
nd
call, select and confirm the ACCEPT option
from display
• The 1
st
call is automatically placed on soft HOLD and you will be
connected to 2
nd
call
• To end the 2
nd
call and return to the 1
st
, press the
DISCONNECT key.
OR
• Hang up from current call. The 2
nd
call will ring through with
“Recalling” on display.
• Answer telephone