Unify OpenStage 40 Reference Guide

OSVoice – OpenStage 40 Page 4 of 5
Telephone Reference Guide Training Information Provided By: InfoTel Integrated Services
FORWARD
Temporarily redirect calls to another destination
Once the Destination Targets (1 thru 5) are
programmed, user can easily select which target
to forward to.
• Press CALL FORWARD button (gray button with fwd arrow and dot)
• If nothing else is pressed, calls will automatically fwd to
predetermined target…usually voicemail
• To select a different forwarding destination:
o Press Call Forward button, Scroll
to and select
Edit Call Forwarding
o Scroll
down and select ON from ALL CALLS field
o Scroll
down and select the Destination Field
o Scroll
down and select Edit favorites
o Scroll
and pick a Destination (1 thru 5)
o Enter the extension for this destination
o Press OK
o Scroll
up and select Save & Exit from
Forwarding Favourites screen
o NOTE: Before exiting the Forward Status screen,
be sure that the correct fwd target is displayed in the
DESTINATION field.
o Scroll
up and select Save & Exit from Call
Forward Status screen
o Press the Menu Button (illuminated) to return to your
telephony HOME screen.
To Cancel Forwarding:
• Press Call Forwarding button (illumination of button is
deactivated)
CALL LOG/LIST
The CALL LOG/LIST icon will appear in DISPLAY if a call is RECEIVED,
FORWARDED, MISSED OR DIALED. Once the list is viewed, the ICON will
deactivate.
Each call list may contain up to 30 entries. Once this limit is reached, the oldest
entry in the log is deleted.
Multiple calls from the same number are only listed once. The number of call
attempts is logged in the “Details” context Menu..
TO ACCESS A NUMBER FROM YOUR CALL LOG/LIST:
• From Idle Menu, Press the ENVELOPE/Mailbox button
• Scroll
and select OK at Call Log Envelope to open/view
• Select from: MISSED, DIALED, RECEIVED or FORWARDED
calls
• Scroll
and select a number from the list
TO PROGRAM A SENSOR BUTTON ON
TELEPHONE
IF a 1-touch speed dial number is desired,
be sure to select “Selected Dialing” in the
Normal or Shifted field.
• Press and hold sensor button to be programmed
• Once Program Screen appears, Scroll down to Normal OR
Shifted field and press OK
• Scroll
down and select desired feature for button
• Scroll
down to Label field and press OK
• Using keypad, type desired label for button (if applicable)
• Select OK in bottom corner
• Scroll
down to Settings and press OK
• Type number for the system to speed dial
• Scroll
down and select OK
• Scroll
up and select Save & Exit from Options field
• Press the Menu Button (illuminated) to return to your telephony
HOME screen. (if necessary

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g