System 33
System
Date and time
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar, for
example, the date and time have to be set.
If the date and time have not yet been set on the handset, the display key Time appears.
¤ Press the display key Time
or
¤ . . . use to select Settings OK Date/Time OK . . . then
Own area code
The area code (international and local area code) must be saved on the
phone in order to transfer phone numbers (e.g. in vCards)
Some of these numbers are already preset.
¤ . . . use to select Settings OK Telephony OK
Area Codes OK Check (pre-)set area code
Edit the number:
¤ . . . use to select/switch entry field . . . use to change entry
position . . . delete digit if appropriate . . . use to enter
digit Save
Restoring the phone to default settings
When the settings are reset
• the date and time are retained,
• handsets are still registered,
• the system PIN is retained,
• Maximum Rangeis activated and No Radiation is deactivated.
¤ . . . use to select Settings OK System OK Base Reset OK . . . use
to enter the system PIN OK Ye s . . . the base station is restarted. The restart takes around 10 sec-
onds.
Sett the date:
¤ Date: . . . use to enter the day, month and year in 8-digit format.
e.g. for 14/01/2014
Set the time:
¤ Time . . . use to enter hours and minutes in 4-digit format
e.g. for 07:15
Save setting:
¤ Save
To Next Page
Loading...
Need help?
General
