Unify S5 User Manual

Making calls to multiple parties 43
Toggling (switching between calls)
The Toggle function allows you to switch between two users without allowing
them to speak to each other directly. The two users can be either external or
internal users. You can also withdraw from the calls and connect the two users
with each other. You can also start a conference.
p You are conducting a call.
S Press the key shown.
or Press the display key. The current call is placed "on hold", so that the first user
waits.
o Enter the phone number of the second user.
p The second user answers.
Press the display key to switch between the two calls.
When you end a call, the two users are connected with each other (not possible
when both users are external).
Inquiry
Toggle

Unify S5 Specifications

General

Ethernet Ports	2x 10/100/1000 Mbps
Speakerphone	Yes
HD Audio	Yes
Power over Ethernet (PoE)	802.3af
Supported Protocols	SIP
Wi-Fi	No
Supported Codecs	G.711, G.722, G.729, G.726, iLBC
Weight	800 g
Network Interfaces	Dual Gigabit Ethernet ports