UniPOS FS5200 User Manual

UniPOS Fire Control Panel FS5200
Instruction manual Page 10
Revision 8/07.17 of 69
 Option to prolong the time period for Fire condition stage I with programmable overall
inspection period
 Built-in sounder for fire condition – one tonal, continuous, can be switched off
 Built-in sounder for fault condition – one tonal, discontinuous, can be switched off
 Built-in real time clock
 Set of test modes and options for adjustment :
 Setting the clock;
 Check up of light and sound indications;
 Test of fire alarm lines;
 Adjustment of outputs and the integrated external devices;
 Measuring the current value in the fire alarm lines;
 Programming of parameters and modes of operation;
 Remote programming of the parameters from a distant operator control point.
 Energy independent archive of registered events with the events type, date and hour –
up to 2500 events
 Communication interface for external devices - RS-232 (directly or via modem) or RS-
485.
4.8. Indications of registered events
 Light indication - LED
 Text messages - LCD display -
4 lines x 20 symbols each,
Latin/Cyrillic characters, backlit
 Sound - built-in sounder
4.9. Power supply
4.9.1. Mains
 voltage - 220/230V
 frequency - 50Hz
4.9.2. Backup batteries
 battery type - lead, gel electrolyte
 number of batteries - 2 pcs
 connection - serial connection
 nominal voltage of the backup battery - 24V
 nominal capacity C
20
- 12Ah
 extreme discharge voltage - 21V
 charge voltage - 28,2V
4.9.3. Consumption on backup batteries supply
 Configuration 00 - < 155mA at 24V
- < 150mA at 26V
 Configuration 03 - < 235mA at 24V
- < 225mA at 26V
 Configuration 06 - < 320mA at 24V
- < 305mA at 26V
 Configuration 09 - < 400mA at 24V
- < 380mA at 26V
4.9.4. Power supply to external devices
 voltage - (24±5)V
 maximum current value (including current
of controllable outputs) - 1,5А

UniPOS FS5200 Specifications

General

Brand	UniPOS
Model	FS5200
Category	Control Panel
Language	English