UNIRAC EcoFoot2+ - Warnings and Safety; Safety Requirements

INSTALLATION GUIDE
PAGE
4
10-DEGREE BALLASTED RACKING SYSTEM
WARNINGS AND SAFETY
Warnings & Safety
Both electrical and roong knowledge are required to correctly and safely install a solar photovoltaic system. Only qualied and certied installation professionals
should install EcoFoot2+. Failure to follow the methods and procedures outlined in this guide may result in injury and/or damage to property.
Carefully read this guide before starting any work. Store a copy of this guide on the job site at all times and contact Unirac with any installation questions related to
EcoFoot2+.
WARNING
Please note the following warnings when installing EcoFoot2+:
• EcoFoot2+ components t together tightly and could cause pinch injuries.
• EcoFoot2+ components may be hot to the touch if left in the sun.
Please follow the safety requirements below when installing EcoFoot2+:
• Always keep children and unauthorized people away from work areas.
• Always wear required OSHA approved Personal Protective Equipment (PPE).
• Always use insulated tools when working with or near electrical systems.
• Always provide OSHA approved fall protection for all installation personnel.
• Never wear jewelry during mechanical and electrical installation work.
• Never work in rain, snow or extremely windy conditions.
• Never leave a module unsupported or unsecured on the roof.
• Never install broken photovoltaic modules.
• Never use photovoltaic modules as a work surface.