Unitech AS10 - User Manual

AS10 Quick Start Guide
The following steps will walk you through the installation process.
Connecting and disconnecting the interface cable
An audible “click” sound indicates the interface cable has been plugged in correctly and the connector lock is engaged. To unplug the interface cable,
release the connector lock by inserting one end of a paperclip into the handle.
Paperclip
Connect to host via USB
Plug the interface cable into a free USB port of a host computer.
The Unitech AS10 Linear Imager Scanner
Installation Instructions & Popular Conguration Settings
SETUP AND INSTALLATION
Plug the PS/2 cable into the keyboard port on your host computer.
Connect to host via PS/2
SETTINGS AND CONFIGURATION Enter Mode
You may wish to set your scanner to “Tab Mode.” In this mode, data
will tab over to the next column as you scan. Scan this series of
barcodes to switch to Tab Mode from the default Enter Mode.
1
2
3
4
11
2
3
4
Tab Mode
Scan this series of barcodes to switch back to Enter mode. In Enter
Mode, data will jump to the next line as you scan.
Flash Mode
Scan this series of barcodes to switch to Flash Mode from the default
Trigger Mode. In Flash mode, the AS10 will function automatically. It
will scan at a set interval.
1
2
3
4
The following section covers the most common conguration
settings for your AS10 scanner.
For additional conguration options please visit
unitechscanners.com/AS10 and select the “Download” tab.
You will nd the User’s Manual and a variety of other resources.
Open a word processing program such as Microsoft Word or
Notepad on your host. Now scan the following barcode:
Test & Finish
If the word “Unitech” appears on the screen you have succesfully
installed your scanner. Congratulations!

Unitech AS10 Specifications

General

Type	Handheld bar code reader
Wavelength	632 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	100 reads/s
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, JAN, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	80 mA
Certification	FCC
Product color	Black
Housing material	ABS synthetics
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 95 %

Weight and Dimensions

Depth	63.2 mm
Width	81 mm
Height	180 mm
Weight	120 g

Summary

Setup and Installation

Connect to Host via USB

Plug the interface cable into a free USB port of a host computer for connection.

Connect to Host via PS;2

Plug the PS/2 cable into the keyboard port on your host computer for connection.

Connecting and Disconnecting the Interface Cable

Instructions for connecting the interface cable, noting an audible click and using a paperclip to disconnect.

Test and Finish

Test the scanner by scanning a barcode to confirm successful installation.

Settings and Configuration

Enter Mode

Scan barcodes to switch to Tab Mode or Enter Mode for data input.

Tab Mode

Scan barcodes to switch to Tab Mode, tabbing data to the next column.

Flash Mode

Scan barcodes to switch to Flash Mode for automatic scanning at set intervals.

Trigger Mode

Default Settings

Scan a barcode to return the scanner to its original factory settings for troubleshooting.

How Can We Help You?

Scanner is plug-and-play; contact Unitech support for assistance.