Need help?Do you have a question about the Unitech Hand Held Scanner and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Resolution | 4 mil |
| Drop Specification | 1.5 m |
| Interface | RS232 or USB |
Step-by-step guide for connecting the scanner as a keyboard interface.
Connecting the scanner via USB to PC or iMac systems.
Steps to install the scanner using an RS232 serial interface cable and power adapter.
Guide to installing the scanner as a terminal interface using DB25 RS232 and Y cables.
Instructions for connecting the scanner for wand emulation mode.
Procedures for configuring scanner settings via bar code menus, including groups and parameters.
Using a quick setup chart for convenient one-label-for-one-function scanner configuration.
Duplicating scanner settings to multiple units using custom setup labels.
Using PC software to configure scanner settings and download parameters.
Step-by-step guide for programming data editing formulas using barcode sheets.
Detailed pinout diagrams and descriptions for keyboard, RS232, and terminal interfaces.
Selecting the scanner's device type and setting default configurations.
Configuration options for specific barcode symbologies like Code 39 and EAN128.
Setup options for barcode symbologies including Code 128, MSI, and Codabar.
Configuration settings for UPC, EAN, and Delta Distance barcode types.
To Next Page
